13
2. 3. 1. 4. Checking the cooling unit (CUC)
The evaporator sensor checks the appropriate operation of the appliance after
every defrost period (every 24 hours) by applying a temperature-drop test to
the evaporator. In case of a failure, it stops the operation of the appliance and
the LEDs start blinking continuously (when door is open). If you experience
this, check whether the appliance is overloaded, if it is level, whether the door
was closed, and if the ventilation of the cooling unit is appropriate. If you find
these in order, the appliance may be restarted. To do so, use the black button
on the four-button remote control by holding it close to sensor at the open
door. If the remote control is not available, unplug the appliance from the wall
socket for at least 10 seconds, and re-plug it. The appliance initiates basic
status and it starts work.
Restart in the case of appliance fitted with a reduced-capacity motherboard
must always be performed by unplugging the appliance from the wall socket
for more than 10 seconds.
2. 3. 1. 5. Checking the Automatic Door Control (optional) function
The red LED is normally placed in the right side foot of the miniBar (normally
opens to the right). When the LED is on, it indicates that the miniBar door has
been opened at one point. To shut off the light, use the red button on the four-
button remote control by holding it close to sensor at the open door.
Restart in the case of appliance fitted with a reduced-capacity motherboard
shut-off of the red LED may be performed by a single-button remote control.
Automatic door control cannot be provided for appliances without lighting.
2. 3. 1. 6. Temperature control
Interior temperature may be set to two different values:
In Europe
5°C
In the USA
3°C
To set the desired temperature, use the remote control and the automatic
door control sensor.
The LED indicates the setting of +3°C by blinking 3. (Yellow button)
The LED indicates the setting of +5°C by blinking 5. (Blue button)
Appliances fitted with a reduced-capacity motherboard do not support the
setting of these two values (default value is used).
Yellow button
3°C
Blue button
5°C
Black button
Red button
Restart of
Door open LED "Reddot”
refrigerator
shut-off
