15
2.3.2.1.1. Replacing the assembled optical sensor
- Remove light cover as per section
2.3.2.1.
- Remove PCB connector from lighting panel
(Figure 39)
- By carefully pressing the hemispherical ends of the sensor parts with
fingertips, push the sensor from its seating, hold onto it at the wires and
remove it.
(Figure 40)
- Apply new sensor to the seating, fasten it with the help of fingernails.
(Figure 41)
-
Restore PCB connector to the
lighting panel.
(Figure 39)
Figure 39
Figure 40
Figure 41
Figure 42
