EN
RH418NTE, RH418NTEG
Operation
17
5.4
Mounting the sliding hinge (optional)
You can mount a sliding hinge that allows the cooling device door to be opened at
the same time as the door of the built-in cabinet.
➤
Mount the sliding hinge as shown (fig.
6
Operation
6.1
Before first use
Before first use, clean the minibar inside and outside with a damp cloth for hygienic
reasons (see also chapter “Cleaning and maintenance” on page 20).
6.2
Saving energy
•
Only open the minibar as often and for as long as necessary.
•
Allow warm food to cool down first before placing it in the device to keep cool.
•
Avoid unnecessarily low temperature settings.
•
For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
•
On a regularly basis, make sure the door seal still fits properly.
•
Clean dust and dirt from the condenser at regular intervals.
6.3
Switching on
I
1. Place the cooling device on a firm base.
2. Connect the connection cable to the AC mains supply.
✔
The cooling device starts cooling the interior.
NOTE
•
A few water drops may form inside the cooling device if it has been
cooling for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooling
device falls. The cooling device is not defective. Wipe it out with a
dry cloth if necessary.
DometicRH418NTE-RH418NTEG_IOM_4445102869_EMEA16_202x-xx-xx.book Seite 17 Dienstag, 2. Februar 2021 6:43 18
