EN
Cleaning and maintenance
RH418NTE, RH 418NTEG
20
7
Cleaning and maintenance
!
A
1. Use a soft cloth, lukewarm water and a mild detergent to clean the inside of the
cooling device.
2. Wash out the cooling device using clean water and dry thoroughly.
3. At annual intervals, remove dust from the cooling aggregate at the back of the
cooling device using a brush or a soft cloth.
8
Troubleshooting
General troubleshooting
WARNING! Electrocution hazard
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Damage hazard
•
Never clean the cooling device under running water or in dish water.
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
Problem
Possible cause
Suggested remedy
The cooling is poor.
Too much food was put
in.
Remove some food.
Door is not closed
properly.
Close the door.
Internal air circulation is
restricted.
Provide internal air circulation.
There is no cooling.
Plug is not properly
connected to the mains
socket.
Put the plug into the mains socket
properly.
There is no voltage in
the mains socket.
Establish voltage.
DometicRH418NTE-RH418NTEG_IOM_4445102869_EMEA16_202x-xx-xx.book Seite 20 Dienstag, 2. Februar 2021 6:43 18
