EN
Operating the refrigerator
RM5310, RM5330, RM5380
94
7.1
Switching on the refrigerator
Operation with 230 V
w
➤
Switch on the refrigerator by turning the energy selection switch into the
position for 230 V
w
(fig.
4
, page 4).
Operation with 12 V
g
I
➤
Switch on the refrigerator by turning the energy selection switch into the
position for 12 V
g
(fig.
5
, page 4).
Operation with gas
I
➤
Make sure that the gas supply is turned on.
➤
Turn the energy selection switch to the position for gas operation (fig.
6
,
page 4).
➤
Set the temperature control to the maximum (fig.
7
, page 4).
➤
Press in the temperature regulator and hold it down.
➤
Also press in the battery ignition and hold it down (fig.
8
, page 4).
✓
Ignition takes place automatically. The needle on the flame indicator
moves to the green area (fig.
9
, page 4) once the burner has been
ignited.
✓
Hold down the temperature regulator for an additional 15 seconds.
NOTE
Only select the 12 V
g
mode if the engine is switched on to
prevent the battery from being discharged.
NOTE
If operated with liquefied petroleum gas (LPG), the burner
requires more frequent cleaning (2 – 3 x a year).
