Additional functions
(
RM 7xx5 L - models only
)
10
5.2.6
5.2.7
2
TIP
medium setting
The cooling unit’s performance is influenced by ambient temperatures.
Please select the
medium setting
for ambient temperatures b15°C
and +25°C. The unit operates within its optimum performance range..
5.3
Dometic refrigerators work according to the absorption principle.
Due to physical reasons, an absorption system responds slowly to changes
made on the thermostat controller, or a loss in cooling through opening the
door, or storing food. The devices fulfill the cooling performance require-
ments of the Climatic Class SN acc. to EN/ISO 7371 in the temperature
range of +10°C to +32°C ambient temperature.
5.3.1
Underneath the fascia is a knurled knob for adjusting the
brightness (see item
E
above
)
)
4
5
Temperature setting display (4) with 4 LED to
indicate the selected temperature (MIN - MAX)
LED - dimmer (
5
) for adjusting the brightness of
the display-LED
(only accessible when door open)
Storing food
General advices
Switch the refrigerator on approx. 12 hours before filling it.
Always store pre-cooled foods in the refrigerator. Make sure that the food is well
cooled when it is bought and also when transporting it. Use insulated cooling bags.
When taking food out of the refrigerator only open the refrigerator door very briefly.
Foods must be packed - best of all in closed containers - and stored separately
from
each other.
Allow foods that have been warmed up to cool down before storing.
Products that could emit volatile, flammable gases must not be stored in the refrige-
rator.
Store quickly perishable foods directly next to the cooling fins.
The refrigerator must not be exposed to direct sunlight. Please bear in mind that the
tem- perature inside a closed vehicle increases sharply if exposed to sunlight and
that this can reduce the efficiency of the refrigerator..
The air around the cooling unit MUST be able to circulate freely without any hindran-
ce (see also section 6.3 "Ventilation and air extraction") .
CAUTION
Temperature setting cooling compartment
As shown, you are able to regulate the temperature
of the cooling compartment, if necessary, by turning
rotary knob (2) .