Dometic RM2453 and, Installation And Operating Instructions Manual

REFRIGERATOR REMOvAL

Disconnect the 230- 240 V AC voltage and 12 V 

DC voltage leads.

Shut off the gas supply at the LP tank. 

Disconnect the gas supply line. Always use a 

back up wrench when loosening and tightening 

connections.
Cap the gas supply line, loosen the screws an-

choring the refrigerator to the enclosure and slide 

the refrigerator out of the compartment.
When replacing the refrigerator make sure that 

the sealing strips are properly positioned.
Replacement is the reverse of removal. Check all 

connections for gas leaks. 

1.

2.
3.

4.

5.

6.

To mount the door panel - snap in

Open the door 90 degrees.
Remove the door decoration  

strip (2) by gently pushing the 

four tabs away with a flat blade 

screwdriver (1).

Insert the vertical edges  

into the grooves of the door  

frame (3).

Push the panel downward  

so that the lower horizontal  

edge of the panel (4) is fitted 

into the bottom grove (5).
Snap in the decoration strip (2).

1.
2.

3.

4.

5.

1

2

2

3

3

4

5

INSTALLATION INSTRUCTIONS

Before leaving

Once the installation is complete, test the operation of the 

refrigerator and instruct the user on it’s correct operation. 

If the appliance fails to operate correctly, contact your local 

Dometic Service provider.