Dometic RM3862, Installation And Operating Instructions Manual

7

CERTIFIED INSTALLATION

Certified installations require one roof vent and one lower
side vent.
For “Certified Vent System Kits” see page 14.
For further information contact your dealer or distributor.

CLEARANCES

Minimum clearances in inches to combustible materials
are:
G:

Top

0

K:

Side

0

L:

Bottom 0

M: Rear

0

N:

See NOTE: Clearance “N” below.

NOTE: Clearance “M” is between the rearmost part of
the refrigerator and the wall behind the refrigerator.

NOTE: Clearance “N” is the distance between the bot-
tom of the lower side vent to the roof material. For ven-
tilation height, see table VENTILATION HEIGHTS.
See Figures 9 and 10.

METHODS OF INSTALLATION

The method of installation is shown in FIG. 9.
It is essential that all maximum or minimum dimensions
are strictly maintained, as the performance of the refrig-
erator is dependent on adequate flow of air over the rear
of the refrigerator.

VENTILATION HEIGHTS

Installation with roof

Minimum ventilation

vent and lower side vent

heights in:

Refrigerator

Inches

mm

RM 3862

63-3/4

1620

G

K

K

FIG. 10

L

N

M

NOTE: Wood Strip
MUST be in place

FIG. 9

NOTE: The upper vent should be
centered over the condenser coil
at the back of the refrigerator.

Condenser

Minimum
ventilation
height