EN
RM5310 – RM5385
Troubleshooting
25
With gas operation:
The refrigerator does
not work.
The gas cylinder is empty. Replace the gas cylinder.
The gas valve is closed.
Twist the valve open.
Air is in the supply line.
Switch the refrigerator off
and on again. Repeat the
procedure three or four times
if necessary.
RM5385 only:
In automatic mode:
The refrigerator is
being operated with
gas although it is
connected to the
AC mains.
The mains voltage is too
low.
The refrigerator changes to
AC power supply automatically
as soon as the mains voltage is
sufficient again.
The refrigerator does
not cool sufficiently.
The ventilation around
the cooling unit is not
sufficient.
Check that the ventilation grille
is not obstructed.
The evaporator is iced up. Check whether the refrigerator
door is properly closed. Defrost
the refrigerator.
The temperature is set too
high.
Set a lower temperature.
The ambient temperature
is too high.
Remove the ventilation grille
for a while so that warm air can
escape quicker.
Too much food at once
was placed in the
refrigerator.
Remove an item.
Too much warm food at
once was placed in the
refrigerator.
Remove the warm food and
leave it to cool down before
putting it in again.
The refrigerator has not
been operating for very
long.
Check the temperature again
after four or five hours.
Problem
Possible cause
Suggested remedy
