21
Installing the ventilation system
To install the ventilation grilles, cut two
rectangles (451mm x 156mm) in the outer wall
of the vehicle (for position of the cuts, see
point 6.3).
Securing the refrigerator
In the sidewalls of the refrigerator, there are four plastic sleeves with screws for
securing the refrigerator. The sidewalls or rails attached for securing the refrigerator
must be designed in such a way that the screws will
remain firmly in place even when under increased load
(while the vehicle is moving).
Always insert screws through the sleeves provided;
otherwise, structural parts embedded in the foam,
such as cables, etc., may be damaged.
Once the refrigerator is in its final position, secure the
screws into the wall of the recess.
The screws must penetrate through the sheet metal
casing of the refrigerator.
6.4
1. Seal the mounting frame,
making it waterproof.
2. Insert the frame and
screw into position.
3. Insert the ventilation grilles.
4. Lock the ventilation
grilles.
5. Clip the extractor insert in position
(only for upper ventilation system)
6.5
Summary of Contents for RM6275L
Page 17: ...17 Declaration of conformity 5 19 ...
Page 27: ...27 Wiring diagram 6 9 3 ...
