22
Installation recess
The refrigerator must be installed draught-free in a recess.
The measurements of the recess are given in the table below.
Step (A) is only required for cabinets with a step. Push the appliance far enough into
the recess until the front edge of the refrigerator casing is flush with the front of the
recess. Allow a gap of 15-20 mm between the back wall of the recess and the
refrigeration unit. The floor of the recess must be level, allowing the appliance to be
pushed easily into its correct position. The floor must be substantial enough to bear the
weight of the appliance.
Ensure that the refrigerator is installed level in the recess.
Recess measurements:
Model
Hight H
Width W
Depth T
Heigh HSt
Depth TSt
RM 6275
825 mm
490 mm
515 mm
220 mm
235 mm
RM 6295
825 mm
529 mm
515 mm
220 mm
235 mm
RM 6365
825 mm
490 mm
515 mm
-
-
RM 6405
825 mm
529 mm
515 mm
-
-
6.6
Width of recess = W
Width of recess = W
Summary of Contents for RM6275L
Page 17: ...17 Declaration of conformity 5 19 ...
Page 27: ...27 Wiring diagram 6 9 3 ...
