Dometic RM663 and, Installation And Operating Instructions Manual

INSTRUCTIONS FOR MOUNTING .THE DOOR PANEL

The refrigerator is normally delivered without door panel(s).
Before starting the mounting work check that the panel dimen-

sions are in compliance wiyh those given in the table and read the
instructions through. When mounting the panel, proceed as
follows.

A.
B.

C.

D.

E.

F.

Remove the top decoration strip (2) with its two screws (1).

Insert one of the vertical edges of the panel into the groove

of the door frame (3).
Bend the panel gently so that the free side of the panel can
be slipped into the corresponding groove of the door frame
(4).
Push the panel downwards so that the lower horizontal

edge of the panel is fitted into the bottom groove (5).
Between the upper edge of the panel and the door frame

there is now a gap whii should be covered by the decora-
tion strip.
Put the strip across the door so that the gap is covered and

push it upwards (6).
The tabs on the inside of the strip should fit in behind the

flange of the door frame. Secure the decoration strip by
means of the two screws (1).

Panel dimensions

Thickness max. 5/32"

HEIGHT

WIDTH

TYPE MAX. MIN. MAX. MIN.

RM763

296 293 569 566

11 21/32' 11 17/32" 22 13/32" 29 9/32"

RM763 809 806 566

31 27/32" 31 23/32" 22 13/32" 22 9/32"

RM1303 369 366

618 615

14 17/32" 14 13/32" 24 11/32" 24 7/32"

RM1303 888

885 618 615

lower 35"     34 27/32"

24 11/32" 24 7/32"