EN
Installing the refrigerator
RMD 10.5(X)(T)(S)
20
4.4
Installing the ventilation grill
I
➤
Seal the installation frame to make the connection waterproof (fig.
➤
Insert the installation frame and screw it down tightly (fig.
, page 8). Use all the
fixing holes for this.
➤
Insert the ventilation grill as shown (fig.
4.5
Installing condensation drain
I
Install the condensation drain as follows:
Variant 1
➤
Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤
Attach the condensation hose directly to the fitting intended for it on the ventila-
tion grill (fig.
NOTE
Use exclusively original Dometic ventilation grills to ensure safe opera-
tion.
No. in
Description
1
Slider
2
Ventilation grill
3
Installation frame
4
Fastening for condensation drain
NOTE
•
Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
•
Condensation must be drained with a constant slope.
DometicRMD10.5_INM_4445103405_EMEA18_2021-xx-xx.book Seite 20 Dienstag, 25. Mai 2021 12:06 12
