EN
Troubleshooting
RMD10.5XS
30
No cooling in AC mode
Check if the device is tilted and level it if
necessary.
Reset the error.
Contact customer service if this error occurs
again.
No cooling in DC mode
Check if the device is tilted and level it if
necessary.
Reset the error.
Contact customer service if this error occurs
again.
Gas valve check error
Gas operation is not possible.
Reset the error.
Contact customer service if this error occurs
again.
Internal communication error
Gas operation not possible.
Reset the error.
Contact customer service if this error occurs
again.
In stand-alone gas mode: The battery
charge of the battery packs is too low
Insert new batteries.
Reset the error.
Gas lock after 3 ignition attempts
Ignition not possible.
The gas cylinder is empty. Replace the gas
cylinder.
Reset the error.
Gas lock, internal error in the power
module
Reset the error.
Contact customer service if this error occurs
again.
Ground contact, gas valve
Reset the error.
Contact customer service if this error occurs
again.
Ground contact, ignition electrode
Reset the error.
Contact customer service if this error occurs
again.
Code
Fault
Solution
DometicRMD10_OPM_4445103187_APAC(en)_202x_xx-xx.book Seite 30 Donnerstag, 22. Oktober 2020 1:03 13