EN
Safety instructions
RML10.4, RML10.4S, RML10.4T
12
2
Safety instructions
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Explosion hazard
•
Never open the absorber unit. It is under high pressure and can cause
injury if it is opened.
•
Only
operate the device at the pressure shown on the type plate.
Only use pressure controllers with a fixed setting which comply with
the national regulations (in Europe EN 12864).
Fire hazard
•
Ensure clean and residue-free handling if silicon sealant or similar is
used. There is a risk of fire if silicone filaments come into contact with
hot parts or naked flames.
•
Never use a naked flame to check the device for leaks.
•
Only use propane or butane gas (
not
natural gas).
Health hazard
•
Do not operate the device if it is visibly damaged.
•
If the AC power cable for this device is damaged, it must be replaced
by the manufacturer, a service agent or a similarly qualified person in
order to prevent safety hazards.
•
This device may only be repaired by qualified personnel. Inadequate
repairs may cause serious hazards.
Risk of asphyxiation
•
Dismantle all device doors for the disposal of the old device and leave
the shelves in the device to prevent accidental enclosure and suffoca-
tion.
!
CAUTION! Failure to obey these cautions could result in minor or
moderate injury.
Electrical shock
•
Before starting the device, ensure that the power supply line and the
plug are dry.
Risk of crushing
•
Do not put your fingers into the hinge.
DometicRML10_INM_4445102838_EMEA(en-de-fr-nl)_xxxx-xx-xx.book Seite 12 Dienstag, 23. März 2021 3:17 15
