EN
Installing the refrigerator
RML10.4, RML10.4S, RML10.4T
20
5.6
Install the roof vent
➤
Seal the installation frame to make the connection waterproof (fig.
➤
Insert the installation frame and screw it down tightly (fig.
, page 8). Use all the
fixing holes for this.
➤
Insert the hood and screw it down tightly (fig.
5.7
Securing the refrigerator
!
I
➤
Move the refrigerator into its final location.
➤
Fasten the six screws (fig.
1, page 9) through the six plastic washers in the
sides of the refrigerator, and further into the wall.
➤
2, page 9) onto the screw heads.
No. in
Description
1
Hood
2
Installation frame
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
DometicRML10_INM_4445102838_EMEA(en-de-fr-nl)_xxxx-xx-xx.book Seite 20 Dienstag, 23. März 2021 3:17 15