15
Refrigerator operation
3. Activate Piezo ignition
(3)
several times at
intervals 1-2 seconds.
4. Once the flame ignites, the pointer of galva-
nometer
(4)
begins moving into the green
range. The refrigerator is operational. Keep
knob
(2)
depressed for approx. 15 seconds
and finally release it.
Fig. 12
Fig. 11
Fig. 9
Fig. 10
1. Turn the rotary selector switch
(1)
to
position .
2. Turn the temperature selector
(2)
clockwise
and push. Keep the controller button
depressed.
2
3
4
As a basic rule, gas operation is prohibi-
ted in petrol stations!
WARNING!
4.3.2 Gas operation (Liquid gas)
The refrigerator must be operated using
propane gas
(
no natural gas or town
gas)
. When using LPG gas, please
consider that the burner needs cleaning at
shorter intervals due to the gas combustion
method (2-3 times per year recommended).
For physical reasons, gas ignition faults
could occur starting from an altitude above
sea level of approx. 3280 ft. / 1000 m (
No
malfunction!
)
On the initial refrigerator start-up or after a
cylinder change, air may be trapped in the
gas line. To purge the air from the lines,
switch on the refrigerator and any other gas
appliances (e.g. stove) for a short time. The
gas ignites without delay.
Prior to starting the refrigerator in gas
mode :
Open the gas cylinder valve.
Open the shut-off valve for gas supply to
the refrigerator.
Appliances with Piezo igniter/battery igniter
1
2
All refrigerators with manual ignition are equip-
ped with an automatic flame safety valve
which interrupts the gas supply automatically
after approx. 30 seconds when the flame has
extinguished.
289_0111_17_US_EN_RML8330-Operation_N1-1.qxp 21.05.2012 10:08 Seite 15
Summary of Contents for RML 8330 UL
Page 24: ...24...
