EN
Using the refrigerator
RML94xx
22
7.2
Switching on the refrigerator (RML9430)
Operating with AC power supply
➤
Switch the refrigerator on by turning the power selector to the
position.
Operating with DC power supply
I
➤
Switch the refrigerator on by turning the power selection button to the
position.
Gas operation (fig.
6
, page 4)
!
I
➤
Make sure that the gas supply is turned on.
➤
Turn the power selector switch to the
position.
➤
Turn the temperature control to the maximum level
(A)
.
➤
Press in the temperature regulator and hold it down.
➤
Press in the battery igniter as well and hold it down
(B)
.
✓
The burner is ignited automatically. The needle of the pilot light moves to the
green zone once the burner has ignited
(C)
.
➤
Press and hold down the temperature regulator for another 15 seconds.
NOTE
Only select the operating mode with direct current (battery mode) if the
vehicle engine is running and is providing sufficient voltage to the light
system or if you are using a battery monitor.
WARNING! Fire hazard!
Never operate the refrigerator with gas at petrol stations.
NOTE
When operating with LPG, the burner must be cleaned frequently (two
or three times a year).
RML94xx-O-West.book Seite 22 Samstag, 11. November 2017 5:11 17
