EN
Using the refrigerator
RML94xx
28
A
7.10
Positioning the shelves
Removing the shelf (fig.
a
, page 6)
➤
Release the two locks on the sides of the shelf.
➤
Lift the shelf slightly and pull it out.
Inserting the shelf (fig.
b
, page 6)
➤
Slide the shelf into the rails at the required position.
➤
Lock the shelf on both sides.
Adjusting the item holders
The item holders (fig.
b
1, page 6) are plugged in, and can be adjusted to any level
by pushing and pulling.
7.11
Removing/inserting the vegetable compartment
Removing the vegetable compartment (fig.
c
, page 6)
➤
Open the refrigerator door to 90°.
➤
Pull out the vegetable compartment until the limit stop.
➤
Press in the limit stop on both the guide rails.
➤
Remove the vegetable compartment.
Inserting the vegetable compartment (fig.
d
, page 6)
➤
Open the refrigerator door to 90°.
➤
Fit the vegetable compartment in the rails.
➤
Slide the vegetable compartment in all the way.
✓
Once it has clicked into place the vegetable compartment is secured from being
pulled out.
NOTICE!
•
Do not use different types of batteries.
•
Avoid short circuits at the contacts in the battery compartment.
RML94xx-O-West.book Seite 28 Samstag, 11. November 2017 5:11 17
