EN
RML94xx
Using the refrigerator
29
7.12
Removing the freezer compartment
Proceed as follows (fig.
e
, page 7):
➤
Release the freezer compartment door with a screwdriver
(A)
.
➤
Remove the freezer compartment door
(B)
.
➤
Release the freezer compartment base on both sides
(C)
.
➤
Remove the freezer compartment base
(D)
.
I
7.13
Defrosting the refrigerator
A
I
➤
Disconnect the voltage and gas supply.
➤
Empty the refrigerator.
➤
Put a cloth in the freezer compartment and the refrigerator to absorb any excess
water.
➤
Leave the door open.
✓
The thawed water of the main refrigerator runs into a receptacle on the back of
the refrigerator where it evaporates.
➤
Wipe both compartments dry with a cloth.
NOTE
•
Keep the freezer compartment door and the base in a safe place to
prevent any damage.
•
When installing, replace the parts in the reverse order.
NOTICE!
Never use mechanical tools to remove ice or to loosen objects stuck to
the device.
NOTE
Over time, frost builds up on the cooling fins inside the refrigerator. If this
layer of frost is about 3 mm thick, you should defrost the refrigerator.
RML94xx-O-West.book Seite 29 Samstag, 11. November 2017 5:11 17
