EN
Installing the refrigerator
RUC5208X, RUC6408X, RUC 8408X
14
Installation with two rear vents
•
The air inlet and outlet vents must not be covered by vehicle parts (such as an
open door or by installing accessories such as bicycle racks) while operating.
•
Install the refrigerator so that it is protected from excessive heat, as this leads to
poor performance and increases the power consumption of the refrigerator.
•
The electrical installation must comply with national and local regulations.
Pos. in
fig.
6
, page 14
Description
1
Maximum height to 250 mm below the compressor shelf
2
LS300 ventilation grille
3
Minimum height is equal to the height of the compressor shelf
4
Air deflection plate
4
2b
2a
3
1
4
2b
2a
3
1
6
RUC8408X--IO-AU.book Seite 14 Donnerstag, 27. Dezember 2018 1:52 13