EN
Connecting the refrigerator
RUC8408X
22
Key to the figure
A
➤
Before starting up the device for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤
Connect the cable to the refrigerator DC terminal block (
1
).
➤
Connect the refrigerator
– as directly as possible to the poles of the battery
– with fuse protection fitted to the side of the supply cable and the positive
vehicle wire of 15 A (at 12 V) or 7.5 A (at 24 V).
Coordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm
²
NOTICE!
Make sure the polarity is correct.
-
1
j
RUC8408X--IO-AU.book Seite 22 Freitag, 22. Dezember 2017 8:21 20