background image

OWNERS LIMITED WARRANTY

 

Smart Touch Cabin Control Installation & Operations Manual

36

L-3380 ENGLISH

T

ABLE

 

OF

 W

ARRANTY

 P

ERIODS

AIR CONDITIONING

Important Notes:

1. Warranty periods begin from the date of possession of the boat by the first owner if OEM installed or date of installation if dealer 

installed, but not to exceed three (3) years from date of production. The warranty is transferable and will carry the remainder of the 
original owner's warranty based on the original date of purchase or date of installation.

2. Proof of purchase or installation may be required to verify warranty coverage.
3. Any unit or replacement part installed due to a warranty failure carries the remainder of the original warranty. Warranty coverage 

does not start over from the repair/replacement date.

4. Warranty coverage shall not exceed three (3) years from the date of production.
5. These warranty periods are effective March 1, 2010.

MARINE AIR - Direct Expansion, Self-Contained, Split-Systems, and Modulating Systems

Product

Sale Type

Warranty Coverage

Vector Turbo
Vector Compact
Emerald Series
Condensers and Evaporators

OEM or Dealer Installed with digital or 
mechanical controls.

2-Year Warranty
1st Year parts and labor, 2nd Year parts only.
Not to exceed three (3) years from date of production.
Pump warranty, see Pump section.

MARINE AIR - Chilled Water Systems

Product

Sale Type

Warranty Coverage

Chilled Water Systems

OEM or Dealer Installed with TWLC or 
latest series control.

2-Year Warranty
1st Year parts and labor, 2nd Year parts only.
Not to exceed three (3) years from date of production.
Pump warranty, see Pump section.

New Model sold as a replacement 
unit or partial retro-fit to an existing 
installation.

Installed with old controls or competitor’s 
controls.

Parts and Labor: 90 days.

MARINE AIR- Chiller Refit Policy

Dometic chillers installed in conjunction with a control system other than a Cruisair or Marine Air control, or a control system that is outdated 
carries a 90-day warranty on defective material or workmanship from the date it is put into service. There will be no warranty coverage for 
operation failures such as control malfunctions, freeze failure and the like. Dometic’s Customer Service and Applications departments will be 
glad to assist with recommendations on the installation, but Dometic will not be responsible for the controls.

MARINE AIR - Pumps, Compressors, Replacement Parts

Product

Sale Type

Warranty Coverage

Pumps

OEM or Dealer Installed with complete 
system.

1-Year warranty, parts and labor.

Wearable parts such as pump seals, brushes and 
plastic valves are not covered under warranty.

Dealer Installed and Aftermarket sales.

1-Year warranty, parts only.

Wearable parts such as pump seals, brushes and 
plastic valves are not covered under warranty.

Compressors

Aftermarket sales

1-Year warranty, parts only

Replacement parts and components

Aftermarket sales

90-Day warranty, parts only

DOMETIC - Air Conditioning Accessories

Product

Sale Type

Warranty Coverage

In-Duct Breathe Easy Air Purifiers

Aftermarket sales

1-Year warranty, parts only

UV bulb is not covered under warranty.

SmartStart Control

Aftermarket sales

1-Year warranty, parts only

Summary of Contents for Smart Touch Cabin Control













































Reviews: