EN
TL, FO
Operating the refrigeration container
25
14. Place the battery compartment lid on the bracket (fig.
15. Tightly fasten the battery compartment lid using the four screws (fig.
8.6
Using the lock for the lid (fig.
Not for FO800NC, FO1000NC
1. Close the sliding doors all the way to the stop.
2. Insert the knob into the opening until it clicks into place to lock the sliding doors.
3. Pull the knob upwards to unlock the sliding doors.
8.7
Removing condensation (fig.
During operation of the refrigeration containers, condensation is generated, which
is then discharged to the outside.
➤
Make sure that the condensation can drain freely.
TL200, TL300, TL450, FO200NC, FO450NC
The refrigeration container has a drain fitting on the back where you can connect a
drain hose.
FO600, FO800NC, FO850NC, FO1000NC
The refrigeration container has a collection container on the rear for draining con-
densation water.
I
8.8
Defrosting the refrigeration container
1. Remove the layer of ice at a thickness of 2 mm using a plastic scraper.
2. Place the open refrigeration container in an environment of approximately
20 °C.
3. Remove the condensation.
NOTE
Ensure that the collection container is regularly emptied. An overfilled
collection container can impair the function of the refrigeration contain-
ers.
TL200-450-600-FO200-450-600-800-1000_OPM_4445102370_EMEA16_202x-xx-xx.book Seite 25 Sonntag, 21. März 2021 1:13 13