21
Installing the ventilation system
6.4
3. Insert the ventilation
grilles.
5. Insert winter cover
2. Insert the frame and
screw into position.
2 . Place the hood in
postion and screw
it to the installation
bays.
1. Seal the installation
bays and screw
them to the vehcile
roof
4. Lock the ventilation grilles.
1. Seal the mounting frame, making it waterproof.
To install the ventilation grilles, cut two rectangles (451mm x 341mm) in the
outer wall of the vehicle (for position of the cuts, see point 6.3).
L 500
To install the ventilation grilles, cut a rectangle (451mm x 156mm) in the outer
wall of the vehicle (for position of the cuts, see point 6.3).
L 205
R 500
Measurements of roof exhaust R500
Length
Width
Height
595 mm
205 mm
150 mm
Roof cut out: 87mm X 507 mm
1. Seal the frame waterproof.
Item 1 does not apply for installation
framess with an integrated seal.
2. Screw on the frame. 3. Insert and lock the ventilation grilles.
