EN
MDT400X
Using the safe
11
➤
Enter a new six digit master code.
➤
Press the
CLOSE
button.
✓
The display shows the message
AGAIN
.
➤
Repeat the entry of the new six digit master code.
➤
Press the
CLOSE
button again.
✓
The safe confirms the change of the master code with the message
DONE
.
8.5
Opening the safe with the master key
A
The safe can be opened in all eventualities with the master key, even in the event of
an electronic fault.
➤
Remove the instruction sticker which conceals the key hole (fig.
1
5, page 2).
➤
Insert the master key into the lock.
➤
Open the safe by turning the master key 90° to the right until the bolts slide
completely home.
✓
The bolts extend mechanically.
Emergency opening with the master key giving a new user code
➤
Remove the instruction sticker which conceals the key hole (fig.
1
5, page 2).
➤
Put the master key into the key hole.
➤
Open the safe by turning the master key 90° to the right until the bolts slide
completely home.
➤
Keep the master key in this position and open the door.
➤
Enter a new four digit code.
➤
Press the
CLOSE
button.
✓
The display shows the message
CLOSED
.
✓
The display shows the message
E-RUN
.
NOTICE!
Only authorised persons must have access to the master key. Keep the
master key very carefully in a safe place.
MDT400X-IO-16s.book Seite 11 Dienstag, 20. September 2016 11:22 11