EN
MDT400X
Using the safe
9
Entering a new code
➤
Enter a four-digit code.
➤
Press the
CLOSE
button.
✓
The display first shows
CLOSE
, then
CLOSED
.
Opening the safe
➤
Enter the correct four-digit code.
✓
The code entered is shown in the display.
✓
The safe will open.
✓
The display first shows
OPEN
, then
OPENED
.
I
NOTE
If an incorrect code is entered, the
E-CODE
message appears on the
display.
After five incorrect attempts, the safe lock will remain blocked for
15 minutes and no further entries are possible. As soon as you press a
button, the
HOLD
message appears on the display, followed by the
remaining time in minutes.
PIN 4X
CLOSE
PIN 4X
MDT400X-IO-16s.book Seite 9 Dienstag, 20. September 2016 11:22 11
