Dominator Select
Instruction Manual
2
Contents
1. Installation Safety Warnings!
3
2. Before you Begin
4
3. Tools Required
4
4. Kit Contents
5
5. Position
5
6. Fit the Opener
6
7. Bracket Position
6
7.1Wall Bracket Position:
6
7.2 Mounting the Wall Bracket:
6
7.3 Attach the Track to the Wall Bracket
6
8. Perforated Angle
7
9. Mounting Brackets and Arms
7
9.1 Mounting the Door Bracket:
7
9.2 Attaching the Arms
7
10. Optional Safety Beam Kit
8
11. Specifications
8
12. Setting Limits
9
12.1 Set the Limit Positions, adjust drive speed:
9
12.2 Clearing the Door Limit Positions
9
12.3 Re-profiling the Door
9
13. Safety Testing
10
13.1 Test the Close Cycle
10
13.2 Testing the Open Cycle
10
13.3 Test the Manual Door Operation
10
14. Auto-Close
11
Installation Instructions
15. Coding a Transmitter
12
15.1 Storing the Transmitter Code
12
15.2 Installation of the Wall Mounted Transmitter 12
15.5 Remotely Coding Transmitters
12
15.3 Erasing All Transmitter Codes
12
15.4 Vacation Mode
12
16. Home Owner Safety Warnings!
13
17. Opener Safety & Security
14
17.1 Your Door CAN NOT be used when:
14
17.2 Your Door CAN be used when:
14
17.3 To Disengage the Opener:
14
17.4 To Re-Engage the Opener:
14
18. Operating your Opener
14
19. User Operating Controls
15
20. Troubleshooting
16
21. Maintenance
18
21.1 Door Maintenance
18
21.2 Battery Replacement
18
21.3 Battery Disposal
18
22. Appendix
19
A - Status Indication during Operating Mode. 19
B - Adjustment Mode Instructions
20
C - Adjusting Force Margins
20
D - Setting Limits via Transmitter
21
E - Setting the PET mode position
21
F - Setting up Tilt Door
22
23. Warranty
23
Home Owner Instructions
WARNING! IMPORTANT SAFETY INSTRUCTIONS
FOLLOW ALL INSTRUCTIONS SINCE INCORRECT INSTALLATION CAN LEAD TO SEVERE INJURY.
•
before installing the drive, remove all unnecessary ropes or chains and disable any equipment, such as locks, not needed for
powered operation;
•
before installing the drive, check that the door is in good mechanical condition, correctly balanced and opens and closes
properly;
•
install the actuating member for the manual release at a height less than 1,8 m;
•
install any fixed control at a height of at least 1,5 m and within sight of the door but away from moving parts;
•
permanently fix the labels warning against entrapment in a prominent place or near any fixed controls;
•
permanently fix the label concerning the manual release adjacent to its actuating member;
•
after installation, ensure that the mechanism is properly adjusted and that the drive reverses when the door contacts a 40 mm
high object placed on the floor.
•
necessary information for the safe handling of a drive weighing more than 20 kg. This information shall describe how to use the
handling means, such as hooks and ropes;
•
the drive must not be used with a door incorporating a wicket door (unless the drive cannot be operated with the wicket door
open);
•
after installation, ensure that parts of the door do not extend over public footpaths or roads.
•
vertical doors and gates need an anti-drop feature or device;
•
information if a hazardous part of the drive is intended to be installed at a height of at least 2.5 m above floor level or other
access level;
•
except for horizontally moving pedestrian doors, ensure that entrapment due to the opening movement of the driven part is
avoided
