Manuale HL.ACFP - Ver. 19.09
Pag.
22
Programming
General Programming Information
Code User ID: each card / tag or fingerprint Digited is associated with a user ID and unique identifier. The user ID can
be any number from 1 to 3000, from 1 to 1000 reserved the fingerprint management and from 1001 to 3000
reserved for the management of the cards / tags, except the following codes:
997-998 are reserved for autorizzatrici fingerprints, that is, a user whose fingerprints allow to disable / enable
the other loads.
999-1000 reserved respectively to the "Add Fingerprint Master" and "Master Delete Fingerprint".
2999-3000 are reserved for cards / tags autorizzatrici that is, a user whose card / tag allows to disable / enable
the other loads.
In order to change the setting of the fingerprint reader you must access the programming mode, to do that you
need to be aware of the Master Code, a code composed of 6 figures that only the administrator / installer of the
device must know.
Default Value Master Code "123456". We recommend arises to change the code for added security.
Basic Operations
Change Master Code
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Change Master Code
(Master Code is any number consists of 6 digits)
(Digit New Master Code)
(Repeat New
Master Code)
Exit programming mode
Add users
Add fingerprint assigns the next available User ID
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Add fingerprint assigns the first available ID.
WARNING: The fingerprint must be clean to prevent
false readings.
(Read the fingerprint reader) (Repeat reading
your fingerprint on the reader)
Exit programming mode
Add fingerprint assigning a specific User ID
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Add fingerprint assigning a specific ID.
(User ID is any number from 1 to 996)
WARNING: The fingerprint must be clean to prevent
false readings.
(Digit User ID)
(Read the fingerprint
reader) (Repeat reading your fingerprint on the
reader)
Exit programming mode
