Manuale HL.ACFP - Ver. 19.09
Pag.
24
Remove all users
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Remove all users
(Digit master code)
Exit programming mode
Remove one or more cards / tags or one or more fingerprints using the "Delete Master Card" provided
Working description
Keystroke combination
Digiting the programming mode
Read the "Delete Master Card" on the reader
Remove one or more cards / tags or one or more
fingerprints
Bring the device one or more cards / tags reader
or read one or more fingerprints on the reader
Exit programming mode
Read the "Delete Master Card" on the reader
Set mode of opening / closing relay
This function allows to set the mode of the device access.
In particular, you can enable / disable the output connected to the reader through the following options:
Option 1) with the single paper detection / tag;
Option 2) with the detection of the card / tag or fingerprint (Default);
Option 3) with the detection of single fingerprint;
Option 4) only after detecting a defined number of cards / tags or fingerprints.
Programming option 1) Select the opening / closing of the relay ONLY detection card / tag
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Select opening / closing of the relay with detection
ONLY cards / tags
Exit programming mode
Use option 1) Open / close the relay card / tag
Open / close the relay with card / tag
Hold the card / tag reader to HL.ACFP
Programming option 2) Select openings / closing of the relay with fingerprint detection or card / tag
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Select opening / closing of the relay with
fingerprint detection or card / tag
Exit programming mode
Using option 2) Open / close the relay with fingerprint detection or card / tag
Open / close the relay with fingerprint detection or
card / tag
Hold the card / tag or fingerprint reader HL.ACFP
Programming option 3) Select opening / closing of the relay with fingerprint detection ONLY
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Select opening / closing of the relay with
fingerprint detection ONLY
Exit programming mode
