Manuale HL.ACFP - Ver. 19.09
Pag.
26
Jamming mode: ON alarm
Alarm configuration
Alarm: ON (Default)
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Alarm ON
(Default 1 minute)
If the blinding mode, will activate the alarm when
there will be 10 wrong attempts, and if it is
disattivataverrà only activated the anti-tamper
(Digit a number from 1 to 3)
Exit programming mode
Alarm: OFF
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Alarm OFF
Warning: this will disable the blinding mode with
alarm
Exit programming mode
Forced door opening
When used with an optional magnetic contact or a magnetic contact incorporated in the lock, if the door is opened
by force, the internal buzzer and the external alarm (if present) will play both. They can be arrested by licensed
users, otherwise it will continue to play for the time defined by the alarm.
Set sensing door opening
When used with an optional magnetic contact or a magnetic contact of the built-in lock, if the door is normally open,
but not closed after 1 minute, the internal beeper will emit an automatic beep to remind people to close the door.
The acoustic signal can be stopped by closing the door or by authorized users, otherwise it will continue to play for
the time defined by the alarm.
Set door opening detection: OFF (Default)
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Detection door opening OFF (Default)
Exit programming mode
Set detection door opening: ON
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Detection door opening ON
Exit programming mode
Working description
Keystroke combination
Digiting the programming mode
(Digit master code)
Accemento ON alarm
Access will be denied to the detection of an
authorized user
Exit programming mode