Evolution Solar HDX
16
5.6
Filling the solar circuit
The
Evolution Solar HDX
boiler is supplied with the inhibitor liquid required for its correct
functioning. The rest of the solar circuit needs to be filled with tap water to obtain a perfect mix of
heat-carrying fluid and for optimum circuit functioning. The circuit is filled by connecting a hose to
the filling inlet on the solar hot water tank.
To correctly fill the solar circuit, proceed as follows:
- Connect the filling inlet to the water
mains with a hose.
- Connect a hose to the level socket and
lead it to a container.
- Open the level socket valve.
- Turn on the water supply.
- When liquid begins to come out of the
level socket, cut off the water supply to
the filling inlet.
- Close the level socket valve when liquid
stops coming out of it.
If the solar circuit should need to be drained and filled while carrying out maintenance, ensure it is
filled with the correct mix of water and inhibitor liquid, with at least 30% inhibitor liquid
(minimum 15 litres).
IMPORTANT: DOMUSA TEKNIK will only be liable for the correct functioning of the system if it
has been filled with DOMUSA TEKNIK inhibitor liquid.
