EN
40
BIOCLASS iC DX
11.7
Ashtray empty warning function
With this function activated, the boiler will notify when the boiler ashtray is full and needs emptying.
The
"Ashtray status"
parameter of the
"User Menu"
shows the status of the ashtray at any given time.
When it is full, a warning will be activated (
E-43
), indicating that it needs to be emptied. By default,
the boiler comes with the ashtray reminder function activated and set to indicative fuel consumption
values, according to the
Bioclass iC DX
boiler model which, depending on the quality and type of fuel,
will have to be adjusted for each system.
Select
“Ashtray empty warning”
(
) parameter of
“Setup menu”
and
press
to access. The value is set by pressing "
+
" and "
-
" symbols of
DHW
(19)
. It is possible to deactivate this function by setting the value of
this parameter to "
OFF
".
The following table shows the kilogrammes of consumption at which the boiler will issue a reminder to
empty the ashtray:
Model
Fuel Kg
Bioclass iC DX 18
750 kg
Bioclass iC DX 25
1000 kg
NOTE Every time a value of this parameter is set, the ashtray must be emptied (see
paragraph 19)
(See "Ashtray cleaning")
.
11.8
Manual setting of feed auger calibration
When this parameter is displayed (
) on
"Setup menu"
, press
to
access and set the value desired by pressing "
+
" o "
-
" of DHW
(19)
.
The range of values selectable is OFF, 0.500 - 5.000 kg.
11.9
Registration of the boiler in iConnect
Use this option to activate the boiler registration process in the
iConnect
APP. First download and
install the application on a mobile device, tablet, or similar, and go to the "Register boiler" option of
the home screen. Use the
iConnect
APP to remotely access all the home comfort management
parameters from anywhere in the world
(see "
iConnect
connectivity).
")
.
Once you have selected the "
iCon
" screen (
) from the
"Configuration Menu"
, press the symbol to access it.
SET
will flash,
and use the "
+
" or "
-
" DHW symbols
(19)
to set the desired value. To
activate the registration of the boiler in
iConnect
set the value to
"
ON
". Once you have completed the registration process in the APP,
the value "
REG
" will be displayed, indicating that the registration was
successful. Setting this value of the screen to "
OFF
" will disconnect
the boiler from
iConnect
, unregistering the APP.
11.10
Screen contrast setting
When this parameter of the
"Setup menu"
is displayed, press
to
access and set the value desired by pressing "
+
" o "
-
" of DHW
(19)
.
The range of values selectable is 1 - 5.
