EN
62
BIOCLASS iC DX
The following procedure is recommended for a correct cleaning of the burner:
Depending on the quantity of wood pellets burned or its quality, the user must clean the walls of the
burner using a suitable brush, in order to avoid excessive ash formation.
A regular check of the amount of fuel should be carried out in the hopper, as a lack of fuel can generate
an error code
E06
.
Dust can also accumulate at the bottom of the hopper, depending on the quality and humidity of the
wood pellets. If there is a large quantity of wood pellet dust in the hopper
, DOMUSA TEKNIK
-s
authorised technical assistance service must be contacted for maintenance.
