31
Actual boiler water pressure.
Actual active boiler temperature set point.
Mixing heating circuit nº 1 flow temperature set
point setting by means of the tactile button
(18)
.
(BIO Hydraulic kit option only)
Actual mixing heating circuit nº 1 flow temperature.
(BIO Hydraulic kit option only)
Mixing heating circuit nº 2 flow temperature set
point setting by means of the tactile button
(18)
.
(BIO Hydraulic kit option only)
Actual mixing heating circuit nº 2 flow temperature.
(BIO Hydraulic kit option only)
Actual outdoor temperature.
(BIO Hydraulic kit option only)
Heating circuits demand.
11.1
Ashtray status
When "Ashtray Empty Warning" function is activated (see
"Setup menu")
, the boiler warns about
the ashtray is full and must be emptied. The parameter
"Ashtray status"
allows checking the fill level
and the screen shows the ash scale bar which indicates the fill level of the ashtray. When it is full, an
"Empty the ashtray"
warning is activated. Whenever the ashtray is emptied, it is necessary to set the
“Ashtray status”
parameter to “0” by pressing "-" for DHW
(19)
.
The display of the notices is as follows:
: Ashtray fill level between 0 and 75 %.
flashing: Ashtray fill level between 75 and 100 %.
and flashing: Ashtray fill level more than 100 %.
