Donaldson Company, Inc.
18
Compressed Air Installation
Caution!
The compressed-air supply must be
oil and moisture free.
Contamination in the compressed
air used to clean filters will result
in poor cleaning, cleaning valve
failure or poor collector
performance.
Purge compressed-air lines to
remove debris before connecting to
the unit
s compressed-air manifold.
Turn compressed-air supply OFF
and bleed lines before performing
service or maintenance work.
1. Remove the plastic pipe plug from the unit
s air
manifold and connect the compressed-air
supply line. Use thread-sealing tape or pipe
sealant on all compressed-air connections.
2. Install a customer-supplied shut-off valve,
bleed-type regulator with gauge, filter, and
automatic condensate valve in the compressed-
air supply line.
Note:
All compressed-air components must be
sized to meet the maximum system
requirements of 90-psi supply pressure.
Do not
increase supply pressure above
100-psi. Component damage can result.
