background image

Donaldson Company, Inc. is the leading designer and manufacturer of dust, mist, and fume collection 

equipment used to control industrial-air pollutants. Our equipment is designed to help reduce 

occupational hazards, lengthen machine life, reduce in-plant maintenance requirements, and 

improve product quality.

Parts and Service

For genuine Donaldson replacement filters and parts, call the Parts Express Line.  For faster service, 

have unit’s model and serial number, quantity, part number, and description available.

Donaldson Company, Inc.
Torit
PO Box 1299
Minneapolis, MN 55440-1299
U.S.A.

The  Donaldson Torit  Warranty

Donaldson warrants to the original purchaser that the major structural components of the goods will be free 
from defects in materials and workmanship for ten (10) years from the date of shipment, if properly installed, 
maintained and operated under normal conditions.  Donaldson warrants all other Donaldson built components 
and accessories including Donaldson Airlocks, TBI Fans, TRB Fans, Fume Collector products and Donaldson built 
Afterfilters for twelve (12) months from date of shipment.  Donaldson warrants Donaldson built filter elements to 
be free from defects in materials and workmanship for eighteen (18) months from date of shipment.  Donaldson 
does not warrant against damages due to corrosion, abrasion, normal wear and tear, product modification, 
or product misapplication. Donaldson also makes no warranty whatsoever as to any goods manufactured or 
supplied by others including electric motors, fans and control components.  After Donaldson has been given 
adequate opportunity to remedy any defects in material or workmanship, Donaldson retains the sole option to 
accept return of the goods, with freight paid by the purchaser, and to refund the purchase price for the goods 
after confirming the goods are returned undamaged and in usable condition.  Such a refund will be in the full 
extent of Donaldson’s liability. Donaldson shall not be liable for any other costs, expenses or damages whether 
direct, indirect, special, incidental, consequential or otherwise. The terms of this warranty may be modified 
only by a special warranty document signed by a Director, General Manager or Vice President of Donaldson. 
To ensure proper operational performance of the equipment, use only genuine Donaldson replacement parts. 
THERE EXIST NO OTHER REPRESENTATIONS, WARRANTIES OR GUARANTEES EXCEPT AS STATED IN THIS 
PARAGRAPH AND ALL OTHER WARRANTIES INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, WHETHER EXPRESS OR IMPLIED ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED.

800-365-1331 USA 
800-343-3639 within Mexico
+52 (449) 300 24 42 Latin America

donaldsontorit@donaldson.com 
donaldsontorit.com

© 2002 Donaldson Company, Inc.   

IOM 1B0510107 (ENG), Revision 3

Printed in USA 

March 2017

Summary of Contents for E-100





















Reviews: