background image

Donaldson Company, Inc. is the leading designer and manufacturer of dust, mist, and fume collection 
equipment used to control industrial-air pollutants. Our equipment is designed to help reduce 
occupational hazards, lengthen machine life, reduce in-plant maintenance requirements, and 
improve product quality.

© 201

5

 Donaldson Company, 

Inc. Printed in APAC 

IOM 

AK0302801

, Revision 

1

 

April 2016

Parts and Service

For genuine Donaldson replacement filters and parts, call the Parts Express Line.  For faster service, 
have unit’s model and serial number, quantity, part number, and description available.

The Donaldson Torit Warranty

Donaldson does not warrant against damages due to corrosion, abrasion, normal wear and tear, product 

modification, or product misapplication. Donaldson also makes no warranty whatsoever as to any goods 

manufactured or supplied by others including electric motors, fans and control components.  After Donaldson 

has been given adequate opportunity to remedy any defects in material or workmanship, Donaldson retains 

the sole option to accept return of the goods, with freight paid by the purchaser, and to refund the purchase 

price for the goods after confirming the goods are returned undamaged and in usable condition.  Such a refund 

will be in the full extent of Donaldson’s liability. Donaldson shall not be liable for any other costs, expenses or 

damages whether direct, indirect, special, incidental, consequential or otherwise. The terms of this warranty 

may be modified only by a special warranty document signed by a Director, General Manager or Vice President 

of Donaldson. Failure to use genuine Donaldson replacement parts may void this warranty. THERE EXIST NO 

OTHER REPRESENTATIONS, WARRANTIES OR GUARANTEES EXCEPT AS STATED IN THIS PARAGRAPH AND 

ALL OTHER WARRANTIES INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, 

WHETHER EXPRESS OR IMPLIED ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED.

Donaldson Australasia

Tel:  1800 503 878 (AU)
Tel:  0800 743 387 (NZ)

Website: www.donaldson

f

ilters.com.au

Donaldson 

China

Tel: 

4

00 820 1038

Website: www.donaldson.cn

Donaldson Japan
Tel: +81 42 540 4114
Website: www.donaldson.co.jp

Donaldson Korea
Tel: +82 251 733 33
Website: www.donaldson.co.kr

Donaldson South Asia
Tel: +91 124 480 7536
Website: www.india.donaldson.com

Donaldson Southeast Asia
Tel: +65 6349 8168
Website: www.asia.donaldson.com

Donaldson USA
Tel: +1 800 365 1331
Website: www.donaldsontorit.com

Donaldson Europe
Tel: +32 16 383 811
Website: www.donaldson.com

Summary of Contents for DFOE3



















Reviews: