Installation, Operation and Maintenance manual
24
DFPRE 6L Dust Collectors
Cartridge suspension yoke
Dirty Air Plenum
access door
Cartridge cover
Cartridge
Wing nut
Washer
Figure 10: Cartridge replacement
Fan assembly removal
Isolate electrical power supply.
1. Open clean air chamber access door.
2. Disconnect electrical cables from terminal box.
3. Remove fan securing bolts.
4. Remove airflow damper panel or fan box from top of collector, if applicable.
5. The fan assembly can now be removed using a suitable lifting arrangement.
Dismantle / decomission dust collector
Make sure to empty dust container and cover all the open areas to prevent
possible dust spillage/exposure during transportation.
Refer to general guidance lifting on page 10.
If it is intended, for any reason, to put the machine out of service and demolish it,
some basic rules must be observed to safeguard health and the environment in
which we live:
• Sheaths, flexible ducts and components made of plastic or non-metal must be
removed and disposed of separately.