RF Baghouse, Models RFT, RFW, and RFWH
30
Note: A snapband retainer has been shipped
for each filter. If you do not have these
snapband retainers, call your Donaldson
representative immediately so they can be
sent to you for proper installation.
3. Pinch the snapband retainer in the center to form a
figure “8”.
4. Bend the loop slightly and place the retainer under
the molded lip of the top flange of the filter. This
shallow lip prevents upward movement of the
snapband retainer after proper installation. With the
snapband retainer held against one side of the filter
top interior, slowly allow the retainer to expand into
the recessed area between the lip rim and the four
interior post stops.
