26
i n s t a l l a t i o n o f g a r a g e a n d i n d u s t r i a l s e c t i o n a l d o o r s
7
door mountInG
U-shaped end support brackets installation
install the u-shaped bracket close to the corner support, matching the bracket and corner
support corners . the external bracket wall must match the corner support plane . according to the
perforation in the bracket mark holes for fastening in the embrasure wall . drill the marked holes
with a drill Ш 12 mm . Hammer in dowels in the wall . fix the bracket to the lintel using tapping
screws (do not tighten the tapping screws) .
check horizontality of the brackets installation
using the c-profile (use of a laser level is
admissible) .
use of the u-shaped end support brackets
ensures high manufacturability of assembling,
mounting and adjustment of the torsion
gear .
attention: the bracket must be installed
in such a way, that the bracket's bend looks
upward .
