48
i n s t a l l a t i o n o f g a r a g e a n d i n d u s t r i a l s e c t i o n a l d o o r s
9
suPPLEmEnt
install the cylinder and fasten it to the lock
housing using a screw .
install the rod, connecting the catch angle and
the lock tongue .
after mounting check for the lock latch run
smoothness and the catch functioning .
install the outer support and fasten it by using three screws and nuts, from the lock components
set .
Put the internal handle on the shank . screw
them .
