i n s t a l l a t i o n o f g a r a g e a n d i n d u s t r i a l s e c t i o n a l d o o r s
61
9
suPPLEmEnt
Omega-profile installation
Installation of double side supports
the omega-profile is installed on the
embrasure with a 4500 mm wide shield and
if there is increased wind load . the profile
is used for the shield reinforcement in both
vertical and horizontal positions .
the omega-profile is recommended to be installed at one level with the side supports and to
be fastened to the panel using rivets or tapping screws (on the inside of the panels) .
the roller's double (reinforced)
side supports are used if the
door leaf has large dimensions
and the load per roller exceeds
35 kg .
disassemble the side supports
with roller holder . Position the
supports on the drilled holes
and fix with tapping screws
for panels .
