OPERATING INSTRUCTIONS
21
7/124 - 10/104, 10/124 - 14/114, 14/84
SERVICE INTERVAL
Service will popup on the screen after one of the two hour service channels has decremented to 5 hours. The user will press the UP or DOWN Button
to display the service channels or press the ENTER Button to acknowledge a service has occurred. Pressing the ENTER Button after the service
channels have been displayed, acknowledges the message and the display unit returns to the default screen. If service is between 5 and 0 hours
or it remains at 0 hours, the SERVICE DUE display will appear every hour. To disable, the user can reset the hours to the OFF position by decreasing
the value to OFF.
See Figure 3
.
Figure 3
The service intervals can be changed by pressing the ENTER Button while on the default screen that displays the engine hours. Using the UP or
DOWN Buttons to highlight the desired interval and press the ENTER Button to select. Use the UP and DOWN Buttons to increase or decrease the
number of hours. Hours will decrement with every hour on the engine. Use the DOWN Button to highlight the Main Screen menu item and press the
ENTER Button to return to the Default Screen of Engine Hours.
See Figure 4.
Figure 4
1 Hour
Timeout
S
M Service
-> 1 Hour
3
2 Hour
50
Press Enter to
Acknowledge
UP/DOWN
ENTER
ENTER OR
UP/DOWN
SERVICE
DUE
Default
Screen
Default
Screen
M Service
-> 1 Hour
100
2 Hour
55
M Service
-> 1 Hour
100
2 Hour
55
M Service
1 Hour
100
-> 2 Hour
55
M Service
1 Hour
100
-> 2 Hour
55
Press Enter
Button
Press & Hold
Enter Button
Return
-> Main Screen
-> Return
Main Screen
M Main Menu
-> Service
Setup
Default
Screen
Summary of Contents for 10/104
