Doosan 10/104 Operation & Maintenance Manual Download

Page: 6 / 110

FOREWORD

7/124 - 10/104, 10/124 - 14/114, 14/84

The contents of this manual are considered to be proprietary and
confidential to and should not be reproduced without the prior written
permission of the company.

Nothing contained in this document is intended to extend any promise,
warranty  or  representation,  expressed  or  implied,  regarding  the
products  described  herein.  Any  such  warranties  or  other  terms  and
conditions of sale of products shall be in accordance with the standard
terms  and  conditions  of  sale  for  such  products,  which  are  available
upon request.

This manual contains instructions and technical data to cover all
routine operation and scheduled maintenance tasks by operation and
maintenance staff. Major overhauls are outside the scope of this
manual and should be referred to an authorised service department.

The design specification of this machine has been certified as
complying with EC directives. As a result:

a) Any machine modifications are strictly prohibited, and will invalidate

EC certification.

b) A unique specification for USA/Canada is adopted and tailored to

the territory.

All components, accessories, pipes and connectors added to the
compressed air system should be:

•

of good quality, procured from a reputable manufacturer and,
wherever possible, be of a type approved by the company.

•

clearly rated for a pressure at least equal to the machine maximum
allowable working pressure.

•

compatible with the compressor lubricant/coolant.

•

accompanied with instructions for safe installation, operation and
maintenance.

Details of approved equipment are available from the company Service
departments.

The use of repair parts / lubricants / fluids other than those included
within the approved parts list may create hazardous conditions over
which the company has no control. Therefore the company cannot be
held responsible for equipment in which non-approved repair parts are
installed.

The company reserves the right to make changes and improvements
to products without notice and without incurring any obligation to make
such changes or add such improvements to products sold previously.

The intended uses of this machine are outlined below and examples of
unapproved usage are also given, however the company cannot
anticipate every application or work situation that may arise.

IF IN DOUBT CONSULT SUPERVISION.

This machine has been designed and supplied for use only in the
following specified conditions and applications:

•

Compression of normal ambient air containing no known or
detectable additional gases, vapours. or particles

•

Operation within the ambient temperature range specified in the

GENERAL INFORMATION

section of this manual.

The use of the machine in any of the situation types listed in
table 1:-

a) Is not approved,
b) May impair the safety of users and other persons, and
c) May prejudice any claims made against the company.

The company accepts no responsibility for errors in translation of this
manual from the original English version.

DOOSAN COMPANY

TABLE 1

Use of the machine to produce compressed air for:

a) direct human consumption
b) indirect human consumption, without suitable filtration and purity

checks.

Use of the machine outside the ambient temperature range
specified in the

GENERAL INFORMATION SECTION

of this

manual.

This machine is not intended and must not be used in potentially
explosive atmospheres, including situations where flammable
gases or vapours may be present.

Use of the machine fitted with non approved components /
lubricants / fluids.

Use of the machine with safety or control components missing or
disabled.