Caution :
Align the bolt holes with gasket holes to
p r e v e n t d a m a g e t o t h e g a s k e t a n d
tighten.
9.3.23. Oil filter
•
Install the oil filter onto the cylinder block,
and tighten the fixing bolts.
•
I n s t a l l p a c k i n g a n d a s s e m b l e t h e
cartridge using a filter wrench.
9.3.24. Oil cooler
•
Coat a grease at the oil hole of the oil
cooler housing and insert the O-ring.
•
Assemble the oil cooler assembly by
tightening the assembling nuts.
•
Connect the cooling water pipe with the
cooling water pump and tighten a hose
clamp.
9.3.25. Starter
•
Assemble the starter in position on the
flywheel housing.
9.3.26. Intake and exhaust valves
•
I d e n t i f y t h e m a r k s o f “ I N ” a n d “ E X ”
impressed on the valve head before
assembling the valve with the valve
h e a d .
- 112 -
EB8M3002
Torque
2.2 kg
.
m
ED7OM004
Torque
4.4 kg
.
m
Summary of Contents for D1146
