OP000599
4-43
Inspection, Maintenance and Adjustment
5.
Coat surface of packing (2, Figure 69) with fuel on new
cartridge (1).
6.
Tighten the cartridge by hand until the packing comes into
contact with the surface of the filter housing head.
7.
When it reach the surface, tighten the cartridge about 3/4
of a turn more.
8.
Coat surface of seal (3, Figure 69) with fuel, and tighten
the bowl with tool.
Change Fuel Filter
1.
Locate fuel filter inside engine compartment.
2.
Position a small container under fuel filter.
3.
Unscrew fuel filter from head assembly. Discard fuel filter.
NOTE:
Dispose of drained fluids according to local
regulations.
4.
After cleaning filter head, install new fuel filter. Screw filter
on head until gasket contacts head, and turn filter 1/2 turn
more with a filter wrench.
NOTE:
Coat fuel filter gasket with fuel.
NOTE:
Fill fuel filter with clean fuel. This will help
reduce fuel system priming.
2
1
FG000428
3
Figure 69
Figure 70
FG006315
WARNING!
Exchange filter after waiting for engine to cool. Be careful of
fire hazards. Do not smoke.
Figure 71
FG000478
Summary of Contents for DX140LC
