2-21
DX380LC-7
One Touch Deceleration Button
Press the left button on the top of the left-hand work lever
(joystick) to reduce engine speed to "LOW IDLE".
When the button is pressed, the engine speed is immediately
reduce to "LOW IDLE" rpm.
When the button is pressed, the machine is moved or the
joystick is operated, the engine speed will return to the setting of
the engine speed control dial.
•
A Type: Two-way or Rotating
•
B Type: Non Two-way and Non Rotating
Horn Button
Press the right button on the top of the left-hand work lever
(joystick) to sound horn.
NOTE:
The starter switch must be "ON".
•
A Type: Two-way or Rotating
•
B Type: Non Two-way and Non Rotating
Shear Switch (If Equipped)
For a machine equipped with a shear, move the thumb wheel
switch on top of right-hand work lever (joystick) to open or close
the shear. Shear switch "RIGHT" is for "OPENING (DUMP)" and
shear switch "LEFT" is for "CLOSING (CROWD)".
NOTE:
This switch also interacts with the jog switch.
DS1603096
A Type
B Type
Figure 32
DS1603094
A Type
B Type
Figure 33
DS1601530
Figure 34
NOTICE
AVOID INJURY
Before using any attachment in a work application, be sure
to check its functional control.
Make sure that desired movement or action is being
activated by the control, e.g. opening/closing, clockwise/
counterclockwise, crowd/dump, etc.