DX380LC-7
NOTE:
Leaving the machine turned on
without using it for an extended
period of time after enabling the auto
shutdown function may discharge
the battery.
2)
Auto Shut-down Time Setting
This menu allows you to set the time for
enabling auto shutdown.
How to access: User Menu
→
Fuel Efficiency
Performance
→
Auto Shut-down Setting
→
Auto Shut-down Time Setting
How to change the time for enabling auto
shutdown
–
After setting the new time and pushing
'OK', the change of time for enabling auto
shutdown is complete.
–
Default setting: 5
C.
Default Power Mode Setting
This menu allows you to choose whether to use fuel
saving mode (work, travel) and smart power control
(SPC) mode.
How to access: User Menu
→
Fuel Efficiency
Performance
→
Default Power Mode Setting
The following menus can be accessed.
•
Fuel Saving Mode (Work)
Enabled: Enters S mode if the engine is
restarted when the operating power
mode is P+ or P.
Disabled: Reverts to the default operating
power mode when the engine is
restarted.
•
Fuel Saving Mode (Travel)
This function is used wheel excavator.
Enabled: Enters S mode if the engine is
restarted when the travel power mode
is P.
Disabled: Reverts to the default travel power
mode when the engine is restarted.
•
Smart Power Control (SPC) Mode
Enabled: Smart power control mode
remembers the previous setting and
maintains the previous mode when
the engine is restarted.
Disabled: The machine always enters smart
power control mode when the engine
is restarted.
Figure 94
DS1900331
Figure 95
DS1900332