2-51
DX380LC-7
D.
Auto Idle Time Setting
This menu allows you to set the time for enabling
auto idle.
How to access: User Menu
→
Fuel Efficiency
Performance
→
Auto Idle Time Setting
How to change the time for enabling auto idle
–
After setting the new time and pushing 'OK', the
change of time for enabling auto shutdown is
complete.
–
Default setting: 4
3.
Machine Configuration
This menu allows you to check and change various vehicle
settings.
The following menus can be checked and changed.
•
Joystick Thumb Wheel Reception Setting
•
AVM Setting
•
Camera Guideline Setting
•
Emergency Engine Speed Control Dial
NOTE:
In vehicles equipped with AVM, the AVM setting
menu is displayed; in vehicles without AVM, the
camera guideline menu is shown.
NOTE:
The menu activation conditions are as follows.
Breaker Operation Time Setting:
When the breaker attachment option is enabled
Joystick Reception Setting:
When the two-way attachment option is enabled
A.
Joystick Reception Setting
The joystick thumbwheel sensitivity can be set.
How to access: User Menu
→
Machine
Configuration
→
Joystick Thumb Wheel
Reception Setting
The joystick sensitivity for the two-way and rotating
option can be set.
Figure 96
DS1900333
Figure 97
DS1900769
Figure 98
DS1900336